Installing The Battery - Lenovo ThinkServer RD220 Hardware Maintenance Manual

8. Remove the battery:
a. Use one finger to push the battery horizontally out of its housing, pushing it away from the PCI riser 2.
b. Lift the battery from the socket.
9. Dispose of the battery as required by local ordinances or regulations. See the Important Notices and
Safety Information on the ThinkServer Documentation DVD for more information.

Installing the battery

The following notes describe information that you must consider when you replace the battery in the server.
• You must replace the battery with a lithium battery of the same type from the same manufacturer.
• After you replace the battery, you must reconfigure the server and reset the system date and time.
• To avoid possible danger, read and follow the following safety statement.
.
Chapter 6 Removing and installing FRUs
197