Lenovo ThinkServer RD220 Hardware Maintenance Manual page 191

1
Remote battery cable connector
2
Remote battery cable
c. Disconnect the battery carrier cable from the battery.
d. Squeeze the clip on the side of the battery and battery carrier to remove the battery from the
battery carrier.
Note: If your battery and battery carrier are attached with screws instead of a locking-clip
mechanism, remove the three screws to remove the battery from the battery carrier.
1
Battery cable
2
Remote battery cable connector
3
Battery
4
Battery carrier
5
Battery connector
e. If you are instructed to return the SAS controller battery, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
.
Chapter 6 Removing and installing FRUs
185