SAS riser-card connectors and LEDs
The following illustrations show the connectors and LEDs on the SAS riser cards.
Note: Error LEDs remain lit only while the server is connected to power.
A 12-drive-capable model server or a diskless model server contains the following riser card:
1
USB connector
2
PCI Express RAID adapter
3
SAS error LED
A tape-enabled model server contains the following riser card:
1
USB connector
2
PCI Express RAID adapter
3
SATA tape signal
4
Tape power
5
SAS error LED
6
USB tape
PCI riser-card adapter connectors
The following illustration shows the connectors on the PCI riser card for user-installable PCI adapters.
.
Chapter 6
Removing and installing FRUs
135