1. Read the safety information that begins on page Safety information.
2. Turn off the server and peripheral devices and disconnect all power cords and external cables.
3. Remove the cover.
4. Remove the fans (see Removing a hot-swap fan).
5. Remove the PCI riser-card assemblies and the DIMM air baffle (see Removing a PCI riser-card assembly
and Removing the DIMM air baffle).
6. Press the fan-bracket release latches
out of the server.
Installing the fan bracket
To install the fan bracket, complete the following steps.
176
ThinkServer RD220 Hardware Maintenance Manual
1
toward each other to release the pins
2
and lift the fan bracket