Lenovo ThinkServer RD220 Hardware Maintenance Manual page 35

Hardware maintenance manual for rd220
Hide thumbs Also See for ThinkServer RD220:
Table of Contents

Advertisement

• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved.
• See Chapter 7 "Parts listing, ThinkServer RD220 Type 3729, 3779, 3797, and 3798" on page 205 to determine
which components are customer replaceable units (CRU) and which components are field replaceable
units (FRU).
• If an action step is preceded by "(Trained service technician only)," that step must be performed only by
a trained service technician.
Error code
Description
062
Three consecutive boot failures using the
default configuration.
101, 102
System and processor error.
106
System and processor error.
151
Real-time clock error.
161
Real-time clock battery error.
Action
1. Run the Server Configuration and Boot
Management program, save the configuration, and
restart the server.
2. Update the system firmware to the latest level.
(see the information in Installation and User Guide).
3. Reseat the following components, one at a time, in
the order shown, restarting the server each time:
a. Battery
b. (Trained service technician only) Microprocessor
4. Replace the following components one at a time,
in the order shown, restarting the server each time:
a. Battery
b. (Trained service technician only) Microprocessor
c. (Trained service technician only) System board
(Trained service technician only) Replace the system
board.
(Trained service technician only) Replace the system
board.
1. Reseat the battery.
2. Clear CMOS memory. See "System-board
switches and jumpers" on page 132 for information
about how to clear CMOS memory.
3. Replace the following components one at a time,
in the order shown, restarting the server each time:
a. Battery
b. (Trained service technician only) System board
1. Reseat the battery.
2. Clear CMOS memory. See "System-board
switches and jumpers" on page 132 for information
about how to clear CMOS memory.
3. Replace the following components one at a time,
in the order shown, restarting the server each time:
a. Battery
b. (Trained service technician only) System board
29
.
Chapter 5
Diagnostics

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents