Installing The Cover - IBM x3655 - System - 7985 Service Manual

Installing the cover

To install the cover, complete the following steps:
1. Make sure that all internal cables are correctly routed.
2. Place the cover-release latch in the open (up) position.
3. Insert the bottom tabs of the top cover into the matching slots in the server
4. Press down on the cover-release latch to lock the cover in place.
5. Slide the server into the rack.
6. Connect the cables and power cords.
7. Turn on all attached devices and the server.
40
IBM System x3655 Type 7985: Problem Determination and Service Guide
Cover-release
latch
chassis.