11. Install the riser card assembly (see "Installing the riser-card assembly" on page
12. Install the cover (see "Installing the cover" on page 40).
13. Slide the server into the rack.
14. Connect the cables and power cords.
15. Turn on all attached devices and the server.
Removing the Remote Supervisor Adapter II SlimLine
The following illustration shows how to remove the Remote Supervisor Adapter II
SlimLine.
Riser card assembly
48
IBM System x3655 Type 7985: Problem Determination and Service Guide
85).
Retainer bracket
Riser card
Remote Supervisor Adapter II SlimLine
SAS cable
External SAS
connector