Removing A Cd-Rw/Dvd Drive - IBM x3655 - System - 7985 Service Manual

Removing a CD-RW/DVD drive

To remove the CD-RW/DVD drive, complete the following steps.
1. Read the safety information that begins on page vii and "Installation guidelines"
2. Turn off the server and all attached devices.
3. Disconnect all external cables and power cords.
4. Slide the server out of the rack.
5. Remove the cover (see "Removing the cover" on page 39).
6. Press down on the release tab on the top of the drive bay to release the drive;
7. From the front of the server, pull the drive out of the bay.
8. Remove the retention clip from the drive.
9. If you are instructed to return the CD-RW/DVD drive, follow all packaging
Release tab
on page 35.
then, while pressing the tab, push the drive toward the front of the server.
Drive retention clip
Alignment pins
instructions, and use any packaging materials for shipping that are supplied to
you.
CD/DVD drive
Chapter 3. Removing and replacing server components
55