Installing a CD-RW/DVD drive
To install the replacement CD-RW/DVD drive, complete the following steps.
1. Follow the instructions that come with the drive to set any jumpers or switches.
2. Attach the drive-retention clip to the side of the drive.
3. From the front of the server, slide the drive into the CD-RW/DVD drive bay until
4. Install the cover (see "Installing the cover" on page 40).
5. Slide the server into the rack.
6. Connect the cables and power cords.
7. Turn on all attached devices and the server.
56
IBM System x3655 Type 7985: Problem Determination and Service Guide
Release tab
Drive retention clip
Alignment pins
the drive clicks into place.
CD/DVD drive