Example: Associate R-Dti With Rpd; Feature Information For Synchronizing Time On Cisco Remote Phy Shelf 7200 - Cisco Remote PHY Shelf 7200 Software Configuration Manual And Command Reference

Example: Associate R-DTI with RPD

unicast grant-duration 300
local-priority 128
Example: Associate R-DTI with RPD
The following example shows how to associate R-DTI with RPD:
enable
configure terminal
cable rpd node1
identifier badb.ad17.4820 (node vbh0 mac)
core-interface Te7/1/4
rpd-ds 0 downstream-cable 7/0/16 profile 0
rpd-us 0 upstream-cable 7/0/16 profile 0
r-dti 20
rpd-event profile 0
Feature Information for Synchronizing Time on Cisco Remote
PHY Shelf 7200
Use Cisco Feature Navigator to find information about the platform support and software image support.
Cisco Feature Navigator enables you to determine which software images support a specific software release,
feature set, or platform. To access Cisco Feature Navigator, go to the
on the Cisco.com page is not required.
Note
The following table lists the software release in which a given feature is introduced. Unless noted otherwise,
subsequent releases of that software release train also support that feature.
Table 5: Feature Information for Synchronizing Time on Cisco Remote PHY Shelf 7200
Feature Name
Synchronizing
Time
Cisco Remote PHY Shelf 7200 Software Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
26
Cisco Remote PHY Shelf 7200 Start Up Configuration Guide for Cisco Remote PHY Shelf 7200 Software 1.1
Releases
Cisco Remote PHY Shelf 7200
Software 1.1
www.cisco.com/go/cfn
Feature Information
This feature was introduced on the Cisco Remote
PHY Shelf 7200.
link. An account