Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 51

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Prior Releases Features and Enhancements
Release 3.1 Enhancements (March, 1996)
!
SECURITY ALERT:
Before removing restrictions, it is strongly recommended that you read
Appendix A, "Customer Support Information."
Default Facility Restriction
Level (FRL) for VMI Ports
The default Automatic Route Selection (ARS) FRL for VMI ports is 0, restricting
all outcalling.
Default for the Default Local Table
The default Automatic Route Selection (ARS, Hybrid/PBX mode only) FRL has
changed to 2 for the Default Local table. System managers can easily change
an extension default of 3 to 2 or lower in order to restrict calling. No adjustment
to the route FRL is required.
New Maintenance Procedure for
Testing Outgoing Trunks
Technicians must enter a password in order to perform trunk tests.
The enhancements in Release 3.1 help increase the security of the MERLIN
LEGEND System. To fully utilize these security enhancements, be sure to read
and understand the information in these upgrade notes and in the relevant
system guides.
Issue 1
August 1998
Page lii