Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 227

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Connecting Data Equipment
Data Stations
See Form 2a, System Numbering: Extension Jacks for your customer's
specifications. Then refer to the appropriate section later in this chapter
for instructions on setting up modem data stations.
Terminal Adapter Data Stations
A terminal adapter data station uses a 7500B or ExpressRoute data
module to convert MLX voice signals and DTE digital signals to the
digital transmission signaling standard, so that it can send and receive
digital signals. This type of station requires PRI facilities to send and
receive data to and from digital data stations that are outside the
system.
The system supports the following types of data stations connected to
terminal adapters:
MLX Voice and Terminal Adapter Data. This station includes a
terminal adapter, a data terminal, and an MLX telephone.
Terminal Adapter Data-Only. This station includes a terminal
adapter, and a data terminal, but no telephone.
For your customer's specifications, see Form 2a, System Numbering:
Extension Jacks and Form 2b, System Numbering: Digital Adjuncts.
Then refer to the appropriate section later in this chapter for instructions
on setting up terminal adapter data stations.
NOTE:
A video conferencing data station is a synchronous terminal
adapter data station. Refer to "Video Conferencing Data Stations"
for more information.
Issue 1
August 1998
Page 6-4