Unit Load Calculation Worksheet - Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual
Release 6.1
Hide thumbs
Also See for MERLIN LEGEND Release 6.1:
- Feature reference (1021 pages) ,
- System programming manual (1010 pages) ,
- System planning manual (588 pages)
Table of Contents
Advertisement
MERLIN LEGEND Communications System Release 6.1
MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installation
Unit Load Calculation Worksheet
Unit Load Calculation
Worksheet
If you determine that you need to recalculate the unit load for any carrier, use
the instructions on the following worksheet.
NOTE:
You should have a separate copy of the worksheet for each carrier.
See "Unit Loads" in Chapter 1 for information on recalculating unit loads.
The 391A3 power supply has a maximum rating of 75 unit loads. If your system
contains a 391A1 or 391A2 power supply module, and the unit loads for that
carrier will exceed 54, it is recommended that a 391A3 power supply be
installed in the system. Auxiliary Power Units cannot be used with the 391A3
power supply.
Issue 1
August 1998
August 1998
Page B-1
B
2
Issue 1
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the MERLIN LEGEND Release 6.1 and is the answer not in the manual?