Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 212

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installing the PC, CAT, or Printer
Connecting a Printer to the Control Unit
Connecting a Printer Within 50 Feet (15.2 m)
If the printer is within 50 ft. (15.2 m) of the control unit and is connected
to the same 117-V AC branch as the control unit, use this procedure to
connect a printer to the control unit.
You need the following hardware for this procedure:
Z200A EMI filter
Adapter for the connector on the interface cable
— 355A for a male connector
— 355AF for a female connector
Issue 1
August 1998
Page 5-15