Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 48

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Prior Releases Features and Enhancements
Release 4.0 Enhancements (March, 1996)
Time-Based Option for
Overflow on Calling Group
Release 4.0 has added a time limit for calls in queue in addition to the previous
number of calls limit. If the Overflow Threshold Time option is set to a valid
number between 1 and 900 seconds, calls that remain in the calling group
queue for the set time are sent to the overflow receiver. If the overflow threshold
time is set to 0, overflow by time is turned off. The factory-set time limit is 0
seconds (off).
Single-Line Telephone Enhancements
The following changes enhance the performance of single-line telephones:
Disable Transfer. Through centralized telephone programming, the
system manager can disable transfer by removing all but one SA or
ICOM button from the extension.
No Transfer Return. When a handset bounces in its cradle, the system
interprets this as a switchhook flash and attempts to transfer a call. When
the transfer attempt period expires, the user's telephone rings. Release
4.0 eliminates this unintended ringing by disconnecting the call in
situations where a switchhook flash is followed by an on-hook state and
a dial tone is present.
Forward Disconnect. All ports on 008 OPT, 012, and 016 modules now
send forward disconnect to all devices connected to them when forward
disconnect is received from the CO. This enhancement prevents the
trunk/line from being kept active when one end disconnects from the call.
If an answering machine is connected to the port, it does not record
silence, busy tones, or other useless messages. This operation is not
programmable.
Seven-Digit Password for SPM
Release 4.0 has increased system security by requiring a 7-digit password for
system managers or technicians who use SPM to perform programming or the
Issue 1
August 1998
Page xlix