Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 289

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installing Applications
*
MERLIN MAIL
The number of incoming trunks and subscribers programmed for
Automated Attendant service and the number of busy-hour calls
determine how many MERLIN MAIL
required for the user's system. See Table 8–2.
Table 8-2. MERLIN MAIL Ports Required
Number of Jacks Required
Incoming Trunks
Number of Subscribers or Busy-Hour Calls
Considerations
You cannot connect MERLIN MAIL
system operating in Behind Switch mode.
MERLIN MAIL
4-port configurations. Both models have four hours of message-storage
capacity.
You can use up to eight jacks on an 012 basic telephone module or up to
16 jacks on an 016 (T/R) basic telephone module for MERLIN MAIL
If you use all eight jacks on an 012 module for MERLIN MAIL
cannot connect any other devices to the module. When using fewer than
eight jacks on the 012 module, you can use the remaining jacks for
tip/ring devices.
When a mailbox user receives voice mail messages, the Message LEDs
on his or her telephone are on, provided that a physical telephone has
been assigned to that mailbox.
* This application is no longer available for order.
*
Voice Messaging System is available in 2-port and
*
Voice Messaging System jacks are
2
1 to 6
1 to 20
*
Voice Messaging System to a
Issue 1
August 1998
Page 8-20
4
7 to 18
21 to 60
*
.
*
, you