Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 205

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installing the PC, CAT, or Printer
Connecting a Printer to the Control Unit
Lucent Technologies Call Accounting Terminal (CAT) Printer
Lucent Technologies Call Accounting System Printer
Lucent Technologies Applications Printer
NOTE:
The Lucent Technologies 570 printer is not compatible with the
system.
Printer connection varies depending on the printer model, whether the
printer is grounded on the same AC outlet as the control unit, and
whether the printer is within 50 ft. (15.2 m) of the control unit. The
procedures covered in this chapter are described below:
If the CAT serial printer is used with a CAT and is grounded to the
same AC outlet as the control unit and is within 50 ft. (15.2 m) of
the control unit, refer to "Connecting a CAT and Printer on the
Same AC Outlet."
If the CAT serial printer is used with a CAT and is either not
grounded to the same AC outlet as the control unit or is more than
50 ft. (15.2 m) from the control unit, refer to "Connecting a CAT
and Printer on a Different AC Outlet."
If the SMDR or CAT printer is within 50 ft. (15.2 m) of the control
unit and is connected to the same 117-V AC branch as the control
unit, refer to "Connecting a Printer Within 50 Feet (15.2 m)."
If the SMDR or CAT printer is more than 50 ft. (15.2 m) from the
control unit and is not connected to the same 117-V AC branch as
the control unit, refer to "Connecting a Printer 50 Feet (15.2 m) or
More Away."
!
CAUTION:
Before touching leads, connectors, pins, and other
components, wear a properly grounded wrist strap, to
prevent damage from electrostatic discharge (ESD).
Issue 1
August 1998
Page 5-8