Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 172

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installing Telephones and Adjuncts
Connecting Telephones to the Control Unit
Wiring a Telephone for Two Voice Pairs
If an analog telephone requires either the Voice Announce to Busy
feature or voice and data operating independently, use a bridging
adapter to assign two adjacent odd/even telephone jacks (for example,
01 and 02, 13 and 14) on an analog telephone module to that telephone.
This provides the telephone with the two voice pairs needed to use
these features. See
NOTE:
The numbers of these telephone jacks are boxed on the system
forms. In
adapter refers to the default dial plan extension number, not the
telephone port number.
The even jack on the bridging adapter should be connected to the
odd-numbered telephone port, and the odd jack on the bridging
adapter should be connected to the even-numbered telephone
port.
Figure 3-39 on page
Figure 3-39 on page
3-62.
3-62, the label on the bridging
Issue 1
August 1998
Page 3-61