Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 180

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Connecting the Control Unit to the Network Interface
Wiring
RJ21X Interface
The RJ21X network interface has a female 50-pin (25-pair) amphenol
connector, as shown in
To connect the RJ21X interface to the control unit, you must build a
wiring field between the RJ21X interface and the control unit using a
66-type block (RJ21). This field converts the female amphenol
connector to sets of four 1-pair modular jacks.
Figure 4-1 on page
August 1998
4-6.
Issue 1
Page 4-5