Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 250

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Initializing and Testing the System
Testing the System
Press the same line button repeatedly to toggle between the green
and red LEDs. For a QCC, the display should show the name of the
feature programmed on the button.
To test a fixed-feature button with one LED, press the button.
The Feature and HFAI LEDs should turn off. The first press of the
Speaker button should turn off the Mute LED. The second press of the
Speaker button should turn off the Speaker LED.
To test the red Message light, press a fixed-feature button without
an LED (such as Transfer, Conf, or Drop) or any dialpad button.
The Message light should turn off.
Hang up the handset to leave test mode.
Testing MLX Display Telephones
While the MLX display telephone is in test mode, follow the steps below
to test the display buttons:
Press each fixed display button (Home, Menu, Inspct, and More).
The display should spell out these button labels.
Press the unlabeled display buttons.
The display should indicate
the display button, 1 through 4.
Testing MLX Telephones with MFMs
You should test MLX telephones with MFMs for proper channel
operation and test the MFM circuitry for the TTR, the ring generator, and
the Message light.
To test an MLX telephone with an MFM installed and configured as a
T/R adapter, follow the steps below:
August 1998
n , where n is the number of
Issue 1
Page 7-5