Connecting A Printer Within 50 Ft. (15.2 M) - Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installing the PC, CAT, or Printer
Connecting a Printer to the Control Unit
Figure 5-5. Connecting a Printer Within 50 ft. (15.2 m)
To connect a printer within 50 ft. (15.2 m), follow the steps below. Refer
to Figure 5–5.
Plug the short end of a Z200A EMI cord into the SMDR jack on the
control unit.
Plug the other end of the Z200A EMI cord into a 355AF or 355A
adapter.
Plug the female end of the adapter into either the 25-pin male
connector on the printer's interface cable or the serial port on the
printer.
Set the appropriate printer options for SMDR.
See "Setting Printer Options and DIP Switches"on
instructions.
Processor Module
SMDR
Jack
Z200A
EMI
Tur n
pow off
inse er bef
rtin g ore
rem ovin or
mo dul g
Filter es
G INPUT AG INPUT
355AF
Adapter
Control Unit
EIA-232-D
SMDR Printer
Issue 1
August 1998
Page 5-16
page 5-21 for