Lucent Technologies MERLIN LEGEND Release 6.1 Installation Manual page 287

MERLIN LEGEND Communications System Release 6.1
Installation 555-661-140
Installing Applications
Lucent Technologies Attendant
!
Security Alert:
Products that are connected through a voice port must be properly
restricted to prevent toll fraud. See Appendix A in Maintenance and
Troubleshooting for more information.
Considerations
You cannot connect Lucent Technologies Attendant
operates in Behind Switch mode.
You cannot connect Lucent Technologies Attendant
has an AUDIX application or a voice mail system installed.
You can connect a maximum of four Attendants to the system.
You should program all lines to Lucent Technologies Attendant
reliable far-end disconnect.
The system may need more touch-tone receivers if:
Single-line telephone users do not get a dial tone
Lucent Technologies Attendant
Calls fail to ring or go to coverage prematurely
When Attendant is set up for both daytime and after-hours operation, the
time on each Attendant's clock must match the system clock so that the
system recognizes the end of the business day.
Hardware Requirements
Lucent Technologies Attendant
(T/R) basic telephone module. You can use up to eight jacks on an 012
basic telephone module or up to 16 jacks on an 016 (T/R) basic
telephone module for Lucent Technologies Attendants
†
fails to transfer calls
†
requires connection to an 012 or 016
Issue 1
August 1998
Page 8-18
†
to a system that
†
to a system that
†
for
†
.