Options
Table 3-42. RSTACK HRPTNA parameter options and definitions
Option
offset
length
NONE
Default
Syntax
Options
Table 3-43. RSTACK PRINT parameter options and definitions
Options
BIN
BOTH
TRAY
NONE
Default
RSTACK PRINT
parameter: points
to note
Using LCDS Print Description Language
Definition
The amount of space, specified in bytes (relative to zero), from the start of the
user portion of the record to the subfield within the record.
The number of bytes in the subfield (1 to 16).
Specifies no report name is selected.
NONE
RSTACK PRINT
If DELIMITER=YES is coded, specifies if the report delimiters will
be printed, and if so, the output destination of the printed
delimiters.
RSTACK PRINT = {BIN | BOTH | TRAY | NONE}
Definitions
Specifies that report delimiters will be printed and the output will be delivered to
the stacker tray.
Specifies that report delimiters will be printed, and the output will be delivered
to both the sample tray and the stacker tray.
Specifies that report delimiters will be printed and the output will be delivered to
the sample tray.
Specifies that report delimiters will not be printed.
NONE
•
If DELIMITER=NO has been coded, no page is printed.
•
If the report is being printed in duplex mode, report delimiters
are printed on at most one side of a two sided page.
Using logical processing
3-57