Criteria Command; Table Command Parameters; Table Constant - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Table 3-2. Summary of TABLE command parameters
Parameter
TABLE
CONSTANT
TABLE MASK
Syntax
Options
Table 3-3. TABLE CONSTANT parameter options and definitions
Option
sc
Default
Using LCDS Print Description Language
Each constant that is included in a referenced TABLE command
is examined by the system to see if it is equal in value to the
input data field specified in the CONSTANT parameter of the

CRITERIA command.

NOTE: The TABLE command must precede any CRITERIA
command that references it.
This command requires an identifier of the type ac (at least one
alpha character required).

TABLE command parameters

The following table summarizes the TABLE command
parameters.
Specifies
Defines string constants against which input
data fields are checked for logical processing.
Permits character positions of a string to be
ignored or tested for type attributes.
The following section describes the syntax of the TABLE
command parameters and explains their options.

TABLE CONSTANT

Specifies the content of one or more string constants.
ac: TABLE CONSTANT = {sc | (sc
Definition
string constant.
sc is a string composed of literal characters and masking characters (as
defined by the MASK parameter of the TABLE command).
All string constants must be of the same length in bytes. The number of bytes
for all constants in the table (after conversion of any hexadecimal or octal
constants) is limited to 255 bytes.
No default
Using logical processing
Online Offline
Y Y
Y Y
[, sc ] [,...])}
1 2
DJDE
N
N
3-5