Code Command; Code Command Parameters - Xerox 6100BD - Phaser Color Laser Printer Software Manual

CODE command

ac identifier
Table 2-15. Summary of CODE command parameters
Parameter
CODE ASSIGN
CODE DEFAULT
CODE SPACECODE
Using LCDS Print Description Language
Figure 2-1. Sample BLOCK command diagram
Defines a character code translation table.
When you require a user defined character code translation
table, you define the character translation using this command,
then reference the CODE command using the VOLUME CODE
parameter. As an alternative, you can use the USER option of
the VOLUME CODE parameter to reference the CODE
command for which no identifier was provided.
A command identifier of the type ac is optional for the first
CODE command within a JDE. Thereafter, each additional
CODE command must include the identifier. The ac identifier
consists of 1 to 6 alphanumeric characters (A through Z and 0
through 9). One of the characters must be alphabetic.

CODE command parameters

The following table summarizes the CODE command
parameters.
Specifies
Defines user code assignments.
Specifies a base code from which character
code assignment exceptions can be made.
Specifies the blank code for single-byte
characters
Specifying input parameters
Online Offline
Y Y
Y Y
Y Y
DJDE
N
N
N
2-19