Tcode Command Parameters - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying input parameters
Type
1
2
3
4
None
Table 2-52. Summary of TCODE command parameters
Parameter
TCODE DEFAULT
TCODE TASSIGN
TCODE TRESET
2-50
• The printing system accepts lowercase characters expressed
literally or symbolically; that is, preceded by the pound sign
(#) functioning as a switch case operator.
The following table gives some examples of how the TCODE
command may be coded to specify the following types of
character sets.
Table 2-51. Specifying various types of character sets
Interpretation
Defines numeric characters (0 through 9) by default.
Defines alphabetic characters (A through Z and a through z) by default.
Defines uppercase alphabetic characters (A through Z) by TCODE command.
Defines lowercase alphabetic characters (a through z) by TCODE command.
Defines characters that are neither numeric nor alphabetic.
• The TCODE command requires a variable of the type ac (at
least one character must be alphabetic).

TCODE command parameters

The following table summarizes the use of the TCODE
command parameters.
Specifies
Specifies the initial set of character type
assignments that will be used with masked
comparisons.
Associates one or more specified characters
with one or more specified type codes.
Disassociates one or more characters or all
characters in a set from one or more type
codes.
The following sections describe the syntax of the command
parameters and give explanations of the parameter options.
Online
Y
Y
Y
Using LCDS Print Description Language
Offline DJDE
Y N
Y N
Y N