Output Cover; Output Cycleforms - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying print format parameters
Syntax
Options
Table 4-47. OUTPUT COVER parameter options and definitions
Option
NONE
FRONT
SEP
BACK
BOTH
Default

OUTPUT COVER

parameter: point
to note
Syntax
4-50
OUTPUT COVER
Specifies that cover sheets are to be fed from the AUX stock.
These cover sheets may be placed at the front or back of each
copy of a report.
OUTPUT COVER = {(FRONT [, SEP]) | BACK | (BOTH [, SEP]) |
NONE}
Definition
Specifies that no cover sheets are to be fed.
Specifies that a cover sheet will be fed as the first page of each report copy.
Specifies that no data will be printed on any front cover sheet.
Specifies that a cover page will be fed at the end of each copy. No report data
is printed on back covers.
Specifies that both front and back cover pages will be fed for each report copy.
The front cover sheet will be the first page of each copy.
NONE
If RTEXT is specified along with (FRONT, SEP) or (BOTH, SEP),
RTEXT pages are printed on the covers, and front covers are
picked only on copies for which there is RTEXT. Refer to the
"ROUTE RTEXT" parameter section later in this chapter for
further details on RTEXT.
Refer to "Restrictions on job parameter modification" in the
"Using Dynamic Job Descriptor Entries (DJDEs)" chapter for
more information on COVER specified in a selected JDE.

OUTPUT CYCLEFORMS

Specifies a set of forms to be printed on report pages in a
repeating sequence.
OUTPUT CYCLEFORMS = {NONE | formid | (formid
inkref [inkref ]] [, ...])] [, formid
1 2
[, (INKS, inkref
2
Using LCDS Print Description Language
[, (INKS,
1
[inkref ] [, ...])])}
1 2