Output Graphics - Xerox 6100BD - Phaser Color Laser Printer Software Manual

OUTPUT FORMS
parameter: points
to note
OUTPUT FORMS
parameter
example
Syntax
Options
Table 4-56. OUTPUT GRAPHICS parameter options and definitions
Option
NO
YES
BATCH
Using LCDS Print Description Language
• CYCLEFORMS and FORMS parameters: Both may be
used within a report; however, only the last parameter
specified is in effect at any given time. If a multicopy report
specifies CYCLEFORMS, a FORMS DJDE that is
encountered within the report overrides the CYCLEFORMS
parameter from that point in every copy.
• You can code forms at a workstation with forms creation
software such as Elixir, on another laser printing system
using Xerox Forms Description Language (FDL), or on a
mainframe computer.
You can transfer these form files from tape, CD, or diskette to
the print server disk by using the Import process. (For further
information, click the online [Help] button on your system
print server and refer to "Importing resources.") You can also
download forms from a host computer by using File Transfer
Protocol (FTP) or the FILE DJDE.
The example below shows how to specify forms on different
copies. Form FORM12 appears on copies 1 and 2. FORM3 will
print on copy 3, and FORM4, on copies 4 through 10.
OUTPUT FORMS = (FORM12,1,2), FORMS = FORM3,
FORMS = FORM4, COPIES = 10;

OUTPUT GRAPHICS

Specifies how graphics will be processed in a job.
OUTPUT GRAPHICS = {NO | YES | MOVE | BATCH | ({NO |
YES | MOVE}, NOSUB)}
Definition
Indicates that there are no graphics in this job.
Indicates there are graphics in the job, and they are processed in Batch mode.
Means that the input stream contains no text, but only graphics that are to be
imaged, one per page.
Specifying print format parameters
4-57