Output Idfault - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying print format parameters
Table 4-56. OUTPUT GRAPHICS parameter options and definitions (Continued)
Option
Unused options: The following options are ignored by the FreeFlow Print Server LCDS
systems. They are included here for compatibility.
MOVE
NOSUB
Default
OUTPUT
GRAPHICS
parameter: points
to note
OUTPUT
GRAPHICS
parameter
examples
Syntax
4-58
Definition
Specifies that all referenced graphic disk files will be copied into the print file.
(On the FreeFlow Print Server LCDS systems, YES is used instead.)
If a graphic is missing, specifies that no substitution for the missing graphic
image is desired. (This option is ignored by the FreeFlow Print Server LCDS
systems.)
NO
• If you are using the IMAGE parameter in conjunction with
GRAPHICS, make sure to list the GRAPHICS parameter first,
as these two parameters are order dependent.
• In Batch mode, only one graphic is imaged per page.
• After a graphic has been processed as part of the job, if a
switch to a JDE with GRAPHICS = NO occurs, the
GRAPHICS = NO specification is ignored.
OUTPUT GRAPHICS=BATCH, RESOLUTION=300;
OUTPUT GRAPHICS=MOVE, RESOLUTION=300,
PURGE=NO;

OUTPUT IDFAULT

Specifies the default ink that will be used for objects whose ink is
not specified. This parameter remains in effect until another
IDFAULT parameter is specified.
OUTPUT IDFAULT = 'inkref''
Using LCDS Print Description Language