Sf2Function Djde; Shift Djde - Xerox 6100BD - Phaser Color Laser Printer Software Manual

SF2FUNCTION DJDE

Type
Syntax
Options
Table 5-56. SF2FUNCTION DJDE options and definitions
Option
YES
NO

SHIFT DJDE

Type
Syntax
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)
Specifies to the third party finisher whether or not it should
perform the user defined SF2 operation on the current sheet.
SF2FUNCTION invokes the C7 signal of the electronic interface
between printing system and a third party finishing device. Refer
to your finishing equipment vendor device documentation for
more detailed information.
Page oriented
SF2FUNCTION = {YES | NO}
Definition
Instructs the finisher to begin the operation defined as SF2 on the current
sheet.
Instructs the third party finisher not to perform on the current sheet the
operation defined as SF2.
Shifts the printed image from the edge of the physical page. This
DJDE is commonly used to accommodate hole drilling or
binding.
Page oriented
SHIFT = {YES | NO | (v , v )}
1 2
5-67