Abnormal Imismatch - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Syntax
Options
Table 4-6. ABNORMAL IMISMATCH parameter options and definitions
Option
ABORT
CONTINUE
STOP
Default
ABNORMAL
IMISMATCH
parameter: point
to note
Using LCDS Print Description Language

ABNORMAL IMISMATCH

Specifies the action for a highlight color printer to take when a
specified ink requires a primary ink color that is not currently
loaded.
NOTE: IMISMATCH is a highlight color parameter that is
recognized by printers such as the Xerox 4850 and 4890, as well
as the Xerox DT 128/155/180 HighLight Color Printing Systems.
It may be included in JSLs that are created on the FreeFlow Print
Server LCDS systems for highlight color printing. If the system
encounters this parameter when printing, it is ignored.
ABNORMAL IMISMATCH = {ABORT | CONTINUE | STOP}
Definition
Specifies that the system displays a message for the abnormal condition
and aborts only the report it is processing (not the entire job) without
offering the operator the choice of resuming printing or canceling the job.
Specifies that the system displays a message defining the abnormal
condition and resumes printing the current report with the ink that is
currently loaded, overriding the ISUBSTITUTE parameter and any forms
creation commands that specify no ink substitution.
Specifies that the system displays a message prompting the operator to
load the requested primary ink or to abort the job. The printer stops
printing the report and waits for the operator to resume printing (with or
without changing inks) or cancel the job.
STOP
If a report does not contain an ink list in the JDE, printing may
start before the system is aware of the primary colors that are
needed. For example, page 100 of a report that was designated
black only may specify the green primary when the ink loaded in
the printer is red. This would create an IMISMATCH condition.
Specifying print format parameters
4-5