Pde Command Parameters; Pde Begin - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Table 4-83. Summary of PDE command parameters
Parameter Specifies

PDE BEGIN

Specifies the location of the first print line on the
page.
PDE FONTS Specifies the fonts to be used to print CME and
variable data.
PDE PMODE Specifies whether the job will print with landscape or
portrait orientation.
Defining multiple
logical pages on a
physical page
Syntax
Using LCDS Print Description Language

PDE command parameters

The following table summarizes the PDE command parameters.
The following sections describe the syntax of the PDE command
parameters and explain the parameter options.
PDE BEGIN
Specifies the location of the starting print line of a logical page. It
may be in inches (IN) or centimeters (CM).
Logical pages are user defined page images, each bordered by
Top Of Form, Bottom Of Form, and left and right margins. To
define multiple logical pages on one physical page (one side of a
sheet), you code a separate PDE BEGIN parameter for each
logical page you want to define.
You may define up to 63 logical pages for one physical page.
You may define them in any order and place them on the
physical page in the sequence that the BEGIN parameters
appear in the PDE command. The first BEGIN specified,
whatever its physical position on the page, is logical page one.
ac: PDE BEGIN = (vpos [unit], hpos [unit])
Specifying print format parameters
Online Offline
Y
Y
Y
DJDE
Y Y
Y Y
Y Y
4-95