Xerox 6100BD - Phaser Color Laser Printer Software Manual page 72

PDL principles and procedures
JDLHLC: JDL;
/*System level commands*/
VFU1: VFU
PDE1: PDE
PDE2: PDE
IDR1: IDR
IDR2: IDR
T1: TABLE
C1: CRI
VOLUME
RECORD
LINE
IDEN
RSTACK
ACCT
1-46
NOTE: This JSL contains some highlight color commands and
parameters: IDR, ILIST, ICATALOG, and IDEFAULT. These
commands are processed, but most have no effect on the output
if the JSL is used to print on the FreeFlow Print Server LCDS
systems. However, if the JSL is used on a highlight color printing
system such as the Xerox 4890 LPS, the commands are
followed. Refer to "Printing highlight color applications on
FreeFlow Print Server LCDS systems" in this chapter for
information on how color commands are treated by the FreeFlow
Print Server LCDS systems.
Table 1-8. Sample JSL
ASSIGN=(1,5), ASSIGN=(2,10),
ASSIGN=(3,15), TOF=5, BOF=66;
BEGIN=(175 DOTS, 00 XDOTS),
FONTS=(UN110E, PR110E, PR124B);
FONTS=(L0512C, L05SCA, L05ITA),
PMODE=LANDSCAPE,
BEGIN=(0.725IN, 1.000 IN);
ILIST=('RED','BLACK','PINK');
/***IDFAULT ='RED'***/
ICATALOG=XEROX, PALETTE ='PICTORIAL',
ILIST=('BLACK','RED','PALE PINK');
/*IDFAULT ='BLACK'*/
CONSTANT=(A'REPORT');
CONSTANT=(2, 6, EQ, T1);
HOST=IBMONL, CODE=ASCII;
LENGTH=136, STRUCTURE=VB, LTHFLD=2,
ADJUST=0,FORMAT=BIN,PREAMBLE=3;
DATA=(1,132), OVERPRINT=(PRINT,NODISP),
VFU=VFU1;
PREFIX=A'DJDE', SKIP=6, OFFSET=2,
OPRINFO=YES;
TEST=(C1), DELIMITER=YES;
USER=BIN;
Using LCDS Print Description Language