Xerox 6100BD - Phaser Color Laser Printer Software Manual page 104

PDL principles and procedures
JDL V3.5:
source 4050
file down- 4090 V3.6
loaded to: 4650 4135
Compiled 1 1
in V3.5
Compiled 2 1
in V3.6
Compiled 2 4
in V3.7
Compiled 2 4
in V3.8
Compiled 2 1
in V3.9
Compiled 2 4, 7, 8
in V4.0/5.0
Compiled 2 2
in V3A
Compiled 2 2
in XJDC
4.0
1. Performs as expected.
2. Commands unique to this software release are not supported. Unpredictable results occur in printing.
3. Commands unique to this software release are not supported. However, an error message is
displayed, unique commands are ignored, and the job prints.
4. Job prints in black only.
5. Paper size not supported by the printer. Causes job to abort.
6. RFEED command is not supported.
7. LOGO command in JSL is not supported.
8. Extended CRITERIA and VCODE are not supported.
9. Certain commands and/or parameters are not supported. The commands are processed by the
Compiler, but are ignored by the printer. (Refer to the "PDL command and DJDE summary" in
Appendix A to find out which commands are and are not supported on the different printers.)
1-78
Table 1-14. Software version compatibility
V3.8:
4050 V3.9:
V3.7: 4090 9790
4850 4650 8790
1 1 1
2 3, 5 2
1 4 2
6 1 2
2 2 1
6, 7, 8 4, 7, 8 2
2 2 2
2 2 2
V4.0 &
5.0: VM10:
4850 DP180
4890 V3A: LPS
DP92C 4635 DP180 MX
1 1 1
3, 5 1 1
1 4 4
1 4 4
2 1 1
1 4, 8 4
2 1 1
2 1 1
Using LCDS Print Description Language
DocuSP 3.7:
DP EPS
DP 75 MX
DP 100/115/
135/155/180 MX
9
9
4, 9
4, 9
9
4, 9
9
9