Xerox 6100BD - Phaser Color Laser Printer Software Manual page 69

Using LCDS Print Description Language
– The FreeFlow Print Server on the DP EPS supports
unlimited stock media to be assigned to a tray.
– The FreeFlow Print Server on the Nuvera 1xx MX DPS
supports up to 15 different media to be assigned to a
tray.
• [Output]: Includes sides imaged (1-sided or 2-sided),
finishing, slip sheets, rotation of page image, delivery
(face up or down), order (1 to N or N to 1), output bin
selection (location), collation, and optimization of
throughput speed for jobs containing mixed sizes of stock.
• [Alignment]: Includes unit of measure for the adjustment,
the amount of page image displacement, and printing a
test pattern.
– The DP EPS allows a shift of full-page size; IOT
alignment is not used. The image is shifted on the
page by the amount specified, starting on the next
sheet.
– The Nuvera 100/120 MX DPS supports alignment of +/
- 11 millimeters in both process and cross-process
directions. The image is shifted on the page by the
amount specified, starting in approximately 20 sheets.
NOTE: The features on the Properties, PostScript/PCL,
ASCII, and LCDS tab windows are not late binding attributes.
The items on the Properties tab, including queue and printer
name, input mode (streaming, spooling, etc.), destination
(print or save), and job notes, must be set prior to job
submission.
The items on the PostScript/PCL, ASCII, and LCDS tab
windows must be set before the job is decomposed. If they
are not specified at that time, the system uses the queue
defaults.
4. On each tab window, select the Override check box for each
queue attribute that you want to override all PDL commands
and DJDEs.
NOTE: If [Override] is not selected for an option on the
window, that option has no effect on the job. Instead, the
parameter default in the JDL and JDE is used. If no JDL is
specified, the system uses the default for the command itself.
The following figure shows the Output tab on a queue
Properties window, on which the [Override] check boxes for
the [Location], [Order], and [Delivery] have been selected.
PDL principles and procedures
1-43