Xerox 6100BD - Phaser Color Laser Printer Software Manual page 97

Using LCDS Print Description Language
Figure 1-21. Text Editor – Open a File window
c. In the Folders field, double-click the name of each of the
folders that comprise the path to the "lcds" folder, in the
order shown below:
/opt/XRXnps/resources/lcds
d. In the Files field of the Open a File window, click the name
of the .LST file for the JSL you attempted to compile; or
In the Files text field on the Open a File window, enter the
name of your .LST file. The name syntax is as follows:
JSLNAME.LST
e. Click [OK] on the Open a File window. The .LST file
appears in the text window. This file contains the
following:
• The JSL as you coded it, but with the lines and
columns numbered
• Below each line that contains errors, a message that
explains each error that is on the line
• The <<<<<<<< symbol at the end of each error
message line.
PDL principles and procedures
1-71