Xerox 6100BD - Phaser Color Laser Printer Software Manual page 94

PDL principles and procedures
Option
COMpile
SCAn
PRInt
NOPrint
REPlace
NOReplace
SINglebyte
DOUblebyte
TRUncate
NOTruncate
LABel
NOLabel
DISplay
NODisplay
Vx
PAPersize=s
(VM10 only)
DATe = d
PAGinate=n
OUTpath=p
1-68
Table 1-12. xjdc command options
Definition
Compiles the JSL with printed sheets.
Scans the JSL only.
Generates a printed JSL.
Generates a printed JSL only when it contains errors.
Specifies that an existing JDL file may be replaced by a new output file of the
same name. This is the default.
Specifies that, if the new JSL has the same name as an existing one, the old
file is retained as a backup file and is given a ".backup" extension. REPLACE is
the default.
Specifies use of single byte character code and printer carriage control
translation files.
Specifies use of double byte character code and printer carriage control
translation files.
Restricts command lines in the JSL to the first 72 characters.
Accepts JSL command lines that are longer than 72 characters.
Generates a 128 byte Xerox standard label.
Suppresses the 128 byte Xerox standard label.
Displays all XJDC messages.
Suppresses all XJDC messages.
Software version number.
x = 10, 2, 35, 3615, 37, 38, 39, 40, 50, 3A, or M10
For FreeFlow Print Server LCDS systems, the version number is M10.
Specifies the size of paper the job should print on.
s = USLEGAL, USLETTER, or A4
Specifies the date format.
d = US or EUROPEAN
Specifies the number of lines per page.
n = 0 or 5 through 999 (0 specifies no pagination.)
Specifies the base directory path for output files.
p = / foldername1 / foldername2 /...
The default is the current directory.
Using LCDS Print Description Language