Xerox 6100BD - Phaser Color Laser Printer Software Manual page 457

Table B-2. PDL command quick reference table (Continued)
Command Syntax
LINE LINE BASELINE = {TOP | LARGE[ST] | CENTER | BOTTOM}
LINE BLANKTYPE = {SPACE | NOSPACE}
LINE DATA = (pdo, length)
LINE FCB = {IGNORE | PROCESS}
LINE FDATA = (offset, termination)
LINE FONTINDEX = {offset | offset ([,initval][, bitopt]) | NONE}
LINE GDATA = (offset, termination)
LINE INKINDEX = {offset | offset ([, initval][, bitopt]) | NONE}
LINE LPI = {(linespacing {LPI | DOTS | XDOTS}) | (linespacing
{LPI | DOTS | XDOTS}, lineno, (...))}
LINE MARGIN = {value | (value, valuetype)}
LINE OVERPRINT = (overopt, disp)
LINE PCC = (offset, transtype)
LINE PCCTYPE = {PCCname | PCCid | USER}
LINE UCSB = {IGNORE | PROCESS}
LINE VFU = {VFUid | NONE}
LMODIFY LMODIFY = TEST
MESSAGE MESSAGE ITEXT = {sc | (sc, passnum) | NONE | WAIT}
MESSAGE OTEXT = {sc | (sc [, passnum]) [,WAIT] | sc [, END]
[, WAIT] | NONE}
Using LCDS Print Description Language
PDL command quick reference
Default
—
NOSPACE
offline: 1,134;
online: 0,150
PROCESS
0, DEFAULT
NONE
0, DEFAULT
NONE
—
1, POS
PRINT, NODISP
0,NOTRAN
offline: ANSI
online: IBM4245
PROCESS
NONE
—
NONE
NONE
B-5