Line Baseline - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying print format parameters
Table 4-24. Summary of LINE command parameters (Continued)
Parameter
LINE FDATA
LINE FONTINDEX
LINE GDATA
LINE INKINDEX
LINE LPI
LINE MARGIN
LINE OVERPRINT
LINE PCC
LINE PCCTYPE
LINE VFU
Syntax
4-24
Specifies
Specifies starting and ending points of the file
data within a record.
Specifies that a field within the user portion of
the record defines the index to a specific font to
be used for that line.
Specifies starting and ending points of graphic
data within a record.
Specifies a field within a data record that
contains a number that represents the ink index
in the current ILIST.
Specifies the line spacing values for each line
Defines the size of the left margin on a physical
page
Specifies the manner in which overprint lines
are handled.
Specifies the location of the printer carriage
control field.
Specifies a set of printer carriage control codes
that will be used for a job.
Specifies a vertical format unit table that will be
used for a job.
The following sections describe the syntax of the command
parameters and explain their options.

LINE BASELINE

Defines how to calculate the baseline position of the character
that is being printed.
LINE BASELINE = {TOP | CENTER | BOTTOM | LARGE[ST]}
Online
Y
Y
N
Y
Y
Y
Y
N
N
Y
Using LCDS Print Description Language
Offline DJDE
Y N
Y Y
Y N
Y Y
N Y
Y Y
Y Y
Y N
N N
Y N