Record Command; Record Command Parameters; Record Adjust - Xerox 6100BD - Phaser Color Laser Printer Software Manual

Specifying input parameters

RECORD command

Table 2-37. Summary of RECORD command parameters
Parameter
ADJUST
CONSTANT
RECORD
FORMAT
LENGTH
LMULT
LTHFLD
OFFSET
POSTAMBLE
STRUCTURE
Syntax
2-36
In the previous example, these codes were added to the
standard IBM1403 carriage control code table: X'40' (Space 1
Line And Print), X'F1' (Skip to Channel 1 And Print), and X'F8'
(Print And Skip to Channel 8).
Specifies the structure of the print record. (For online printing,
only the LENGTH parameter of this command is used. For offline
printing, the RECORD command has several additional
parameters that define the record structure.)

Record command parameters

The following table summarizes the RECORD command
parameters.
Specifies
Record length adjust value
Record termination code
Length field recording mode
Maximum logical record length
Multiplication factor to determine record length
Length of field containing record length
Location of record length field
Length of extraneous data at end of record
Input record structure

RECORD ADJUST

Specifies an adjustment value that is added to or subtracted from
the contents of the record length field to determine the true
record length.
RECORD ADJUST = value
Offline
Y
Y
Y
Y
Y
Y
Y
Y
Y
Using LCDS Print Description Language
Online DJDE
N N
N N
N N
Y N
N N
N N
N N
N N
N N