Xerox 6100BD - Phaser Color Laser Printer Software Manual page 332

Specifying print format parameters
Example 3
Example 4
Example 5
4-92
The commands in the following figure illustrate use of the
offsetting features of the OUTPUT command. The parameter
ALL offsets all copies of all reports; FIRST offsets just the first
copy of each report and NONE inhibits offsetting.
Figure 4-5. Illustration of ways to use OUTPUT OFFSET
OUTPUT CYCLEFORMS=(FORM1, NONE, FORM3);
or
OUTPUT CYCLEFORMS=(FORM1,,FORM3);
If there are ten pages in the report, either of the above
commands would cause FORM1 to be applied to pages 1, 4, 7,
and 10; no forms to be applied to pages 2, 5, and 8; and FORM3
to be applied to pages 3, 6, and 9.
The commands in the following figure illustrate the use of
CYCLEFORMS with multiple copies. Note that every copy of a
particular page has the same form, whether COLLATE=YES or
NO. The pages in the following example are not logical pages
but are one side of a physical sheet of paper.
parameter
Using LCDS Print Description Language