Otext Djde: Point To Note; Overprint Djde - Xerox 6100BD - Phaser Color Laser Printer Software Manual

OVERPRINT DJDE

Type
Syntax
Options
Option
overopt
disp
Using LCDS Print Description Language
Using Dynamic Job Descriptor Entries (DJDEs)

OTEXT DJDE: point to note

The DJDE parameters are the same as for the MESSAGE
OTEXT command.
Specifies how overprint lines are handled. (Overprint lines are
print lines whose carriage control specifies printing with no line
spacing because the last printed line.)
Record oriented
OVERPRINT = (overopt, disp)
Table 5-48. OVERPRINT DJDE options and definitions
Definition
overprint option.
This option has the following choices:
• PRINT: Specifies that all overprint lines are printed as they would be on an
impact printer; that is, the second line is printed over the top of the first with
no regard to the previous data, including character spacing, which may
vary between the two lines of data.
• IGNORE: All overprint lines are ignored.
• MERGE: Same as PRINT except when used with FONTINDEX or CME
processing.
Refer to "OVERPRINT DJDE: points to note" below.
• PRINT2: Specifies that up to two consecutive lines are printed per line—
one line and one overprint. Other overprints for the line are ignored.
(Obsolete)
This option has the following components:
• DISP
• NODISP
NOTE: This option is not functional on DP 2000 Series EPS. It is preserved
here for compatibility with other Xerox laser printing systems. The number of
overprint lines is always printed on the accounting page.
5-59