Additional Controls And Indicators; Hard Disk Drive Indicators; Optional Removable Media Drive; Hard Disk Drive Led Indicators - HP Integrity rx1620 Operation Manual

Table 1-1 Control Panel LEDs and Switches (continued)
Name
Diagnostic LED
3
Diagnostic LED
4
Locator Button
and LED
1 See Chapter 4:

Additional Controls and Indicators

The hp Integrity rx1620 Server can have up to two low-voltage differential (LVD), 3.5 inch form
factor hard disk drives installed. These hard disk drives have LEDs that provide status and
activity information.

Hard Disk Drive Indicators

The hard disk drives have two LEDs per drive, as described below.
• Activity LED—The Drive Activity LED is green and indicates disk drive activity. This LED
is directly controlled by the disk drive and turns on when a drive is accessed.
• Status LED—The Drive Status LED is not used on the hp Integrity rx1620.
Figure 1-3 Hard Disk Drive LED Indicators
Table 1-2 Hard Disk Drive LED Definitions
LED
Status LED
Activity LED

Optional Removable Media Drive

The hp Integrity rx1620 Server is delivered without a removable media drive. Either a DVD or
CD-RW/DVD drive may be added. Each of these optional devices has one activity LED.
Figure 1-4 DVD
18 Controls, Ports and Indicators
Function
The four diagnostic LEDs operate in conjunction with the system LED to provide diagnostic
information about the system.
The four diagnostic LEDs operate in conjunction with the system LED to provide diagnostic
information about the system.
The locator button and LED are used to help locate this server within a rack of servers. When the
button is engaged, the blue LED illuminates and an additional blue LED on the rear panel of the
server illuminates. This function may be remotely activated.
Troubleshooting, for details on information provided by the system and diagnostic LEDs.
Activity
None
Flashing green
1
1
Description
Not Used
Drive access under hard drive control