Figure 49 Mbf Tray 1 Turn Roller Clutch Assembly - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

RRP 2.3 MBF Tray 1 Turn Roller Clutch Assembly
(See PL 4.1 Multi-sheet Bypass Feeder (MBF)

Figure 49 MBF Tray 1 Turn Roller Clutch Assembly

Removal
Warning: Switch off the power and disconnect the Power Cord.
1. Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
2. Remove MBF Gear Cover (RRP 1.8 MBF Gear Cover).
3. Disconnect in-line connector P/J124.
4. Remove the screw that secures the Tray 1 No Paper Sensor Assembly Bracket to
the bottom of the Paper handler.
5. Note the harness path, then remove the Turn Roller Clutch harness from the cable
clamps.
6. Remove the E-Ring that secures the Turn Clutch Assembly to the Paper Handler.
7. Remove the Turn Roller Clutch Assembly from the Turn Roller Assembly.
Replacement
1. Reinstall the components in the reverse order.
2. Ensure that the tab on the clutch is positioned on the pin on the Paper Handler.
262
Assembly)
Phaser 5400 Laser Printer Service Guide