RRP 10.1 1000-Sheet High Capacity Stacker [HCS]
(See
PL 10.1 High Capacity Stacker [HCS] (1 of
Figure 108 High Capacity Stacker [HCS] Assembly
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the printer Rear Cover.
2.
Loosen the thumb screw located on the inside of the right frame.
3.
Lift the High Capacity Stacker (HCS) straight up and remove.
4.
Remove HCS Solenoid Assembly (RRP 10.5 HCS Exit Gate Solenoid) if removal
is permanent.
Replacement
Reinstall the components in the reverse order.
318
2))
Phaser 5400 Laser Printer Service Guide