Turn Clutch Assembly (Pl3.3.18) - Xerox Phaser 6250 Service Manual

Turn Clutch Assembly (PL3.3.18)

1.
Remove the Printer Chassis from the Paper Feeder Assembly (page 8-20).
2.
Remove the Paper Pick Assembly (page 8-22).
3.
Release the tab securing the Stopper Clutch (item #2) to the shaft on the right
side of the Paper Pick Assembly.
4.
Pull out the Stopper Clutch.
5.
Disconnect P/J475 (blue) from the Turn Clutch Asssembly.
6.
Pull out the Turn Clutch Assembly (item #1).
1
8-34
2
RIGHT
Phaser 6250 Color Laser Printer Service Manual
REAR
6250-160