RRP 3.4 Tray 1 Low Paper Sensor
(See
PL 3.1 Paper
6
Figure 65 Tray 1 Low Paper Sensor
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect
it from light.
2.
Remove Tray 1.
3.
Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
4.
Remove the Retard Chute Assembly (RRP 3.1 Retard Chute Assembly).
5.
Remove Tray 1 Left Guide Assembly (RRP 3.6 Tray 1 Left Guide Assembly).
6.
Disconnect plug from the sensor.
7.
Release the locking tabs and remove the sensor from the Guide Assembly.
Replacement
Reinstall the components in the reverse order.
276
Feeder)
Phaser 5400 Laser Printer Service Guide
7