Download
Share
Print this page
Xerox 5400DX - Phaser B/W Laser Printer Manual
  1. Manuals
  2. Brands
  3. Xerox Manuals
  4. Printer Accessories
  5. 5400DX - Phaser B/W Laser Printer
  6. Manual
Xerox 5400DX - Phaser B/W Laser Printer Manual

Xerox 5400DX - Phaser B/W Laser Printer Manual

Toner cartridge
Hide thumbs Also See for 5400DX - Phaser B/W Laser Printer:

Advertisement

Quick Links

Download this manual See also: User Manual
XEROX
PHASER 5400
®
TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
XEROX PHASER 5400 TONER CARTRIDGE
www.uninetimaging.com
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com

Advertisement

loading

Related Manuals for Xerox 5400DX - Phaser B/W Laser Printer

Summary of Contents for Xerox 5400DX - Phaser B/W Laser Printer

  • Page 1 PHASER 5400 ® TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS XEROX PHASER 5400 TONER CARTRIDGE www.uninetimaging.com © 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only. UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact techsupport@uninetimaging.com...
  • Page 2 First introduced in October 2001, the Phaser 5400 machine is based on a 40ppm, 1200dpi Fuji-Xerox laser printer engine. This engine is capable of printing on 11” x 17” paper. The exact engine number is not known, but if Fuji-Xerox has kept with past practices, it would be the XP-40 (40ppm).
  • Page 3 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 1. New toner (820g) for use in Phaser 5400 2. New drum for use in Phaser 5400 3. Replacement cartridge pins 4. New replacement chip 5. New doctor blade (optional) 6. New magnetic roller sleeve (optional) 7.
  • Page 4 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 2. Remove the spring from the right side of the cartridge. 3. Remove the two screws and metal drum axle pin from the double gear side of the drum. Separate the two halves.
  • Page 5 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 6. Remove the PCR from its holders. 7. Remove the two screws and wiper blade. 8. Clean out the waste chamber. Be very careful not to lose or 9. Coat the wiper blade with your preferred lubricant, and damage the foam wiper blade seal.
  • Page 6 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 10. Clean the PCR contacts with a cotton swab and alcohol. 11. Clean the PCR with your preferred PCR cleaner and install in the holders. 12. Install the drum, axle pins, and screws. Make sure that the metal axle pin is on the double gear side, and the white plastic pin is on the single gear side.
  • Page 7 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 13. With a small jeweler’s screwdriver, pry the black cover off 14. With the pair of needle nose pliers, pull the fill plug out. the fill plug. Grasp the plug by the small cross braces, and pull. This method does not damage the plug seal.
  • Page 8 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 17. Remove the two screws and doctor blade. 18. Install the seal. Clean out any remaining toner. Make sure the seal tab is slid into the seal tab slot. 19. Install the cleaned doctor blade and two screws.
  • Page 9 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 20. Clean the magnetic roller assembly with a dedicated magnetic roller cleaner. Install the assembly left side (round shaft) first. Make sure the locking tab is firmly locked in place. 21. Install the end cap.
  • Page 10 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 23. Install the fill plug, check for leaks. If the round chip fell off, 24. Install the toner supply section onto the waste chamber. just throw it away. A new chip will be installed later in the Make sure the spring on the supply hopper fits into the plastic instruction.
  • Page 11 XEROX PHASER 5400 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS 27. Install the spring onto the outside of the cartridge. 28. Replace the RF chip. We have found no strange defects related to these cartridges. The following is a list of repetitive defects for the more common failures: 1.

This manual is also suitable for:

Phaser 5400