RRP 1.8 MBF Gear Cover
(See
PL 4.2 Paper
Figure 43 MBF Gear Cover
Removal
Warning: Switch off the power and disconnect the Power Cord.
1.
Remove the MBF Assembly (RRP 2.1 Multi-sheet Bypass Feeder (MBF)
Assembly).
2.
Remove the screw that secures the Left MBF Gear Cover to the left side of the
Paper Handler.
3.
Release the three locking tabs and remove the MBF Gear Cover.
4.
The MBF 2 Idler Gear may come off with the cover.
5.
Release the locking tabs and remove the harness from the MBF Cover.
Replacement
Reinstall the components in the reverse order.
Phaser 5400 Laser Printer Service Guide
Handler)
257