Using The Parts List - Xerox 5400N - Phaser B/W Laser Printer Service Quick Reference Manual

Using the Parts List

1. The numbers shown in each illustration correspond to the parts list number for that
illustration.
2. Throughout this manual, parts are identified by the prefix "PL", followed by a
number, a decimal point, and another number. For example, PL3.1.12 means the
part is item 12 of parts list 3.1.
3. The capital letters "C", "E", and "S" shown in an illustration stand for C-ring,
E-ring, and Screw, respectively.
4. A shaded triangle t in an illustration indicates the item is part of an assembly.
5. The notation "with X~Y" following an part name indicates an assembly that is
made up of components X through Y. For example, "1 (with 2~4)" means part 1
consists of part 2, part 3, and part 4.
6. The notation "RS" means that the part is a requested spare. Part numbers for these
parts will be provided as soon as they are available.
7. An asterisk * following a part name indicates the page contains a note about this
part.
8. The notation "J1<>J2 and P2" is attached to a wire harness. It indicates that
connector jack 1 is attached to one end of the wire harness and connector jack 2 is
attached to the other end that is plugged into plug 2.
382 Phaser 5400 Laser Printer Service Guide